Kevin's Blog Photography, technology, and whatever else

10Nov/113

ESX Datstore filled up by AVVI Snapshots

One thing that I just learned overnight is that you really should keep an eye on the Snapshots in ESX/vSphere.  We are running the AVVI backups from Backup Exec 2010, and it uses the vSphere storage APIs to do it's business.  BE has vSphere run a snapshot by calling the API and then it grabs that snapshot and sends it to whatever your backup medium is.

In the past I have seen where a snapshot gets left behind and not deleted.  Last night I started getting paged from our monitoring system that one of our AD servers was offline.  After having to jump through some hoops to get in via VPN (because the AD server was the one used to authenticate and give DHCP to VPN users) I was able to get onto the ESX server.  There I saw that the snapshots had hogged up all available disk space on the ESX box and my AD server was stalled as a result.  It turns out that the snapshots for my Exchange server were piled up and I had to delete them.  Once there was free space again my AD server was back online and everything is OK again.

Now I need to figure out a way to monitor my ESX server for datastore space so that this does not happen again.

Popularity: 16%

You might also like:

5May/114

BE 2010 AVVI and Exchange agents

This may seem obvious to everyone else out there, but it wasn't to me.  I am testing a new Exchange 2010 server running in VMWare and am experimenting with backups.  I have the whole server backed up using BE AVVI, but wanted the granular restore of mailboxes and messages, so I was also running a job where I selected just the Exchange database. When I went in to do a test restore the Microsoft Information Store showed up in the list with two distinct entries.  The properties looked slightly different but the data was the same.

 

It took me a little time to realize that I was duplicating my Exchange data by having those two backups (duh!), so I turned off my specific Exchange job and just left it with the AVVI job only.  What I didn't realize was that just having the AVVI job would allow me the granular restores of messages from Exchange.

Popularity: 27%

You might also like:

21Apr/110

Backup Exec 2010 Exchange 2010 Agent

For years I've been using and administering Backup Exec.  For nearly all that time I have not used the Exchange agent to it's full capacity.  At my last job we had always just backed up the entire database, and not had it set to be able to do mailbox level restores.  Why?  I think originally, some time long ago, it was really slow to do those types of backups and I wasn't the one in charge at that time.

Jump forward almost a decade and I'm now at a new company.  I have just setup our new Backup Exec 2010 R2 server, and I decided to see what the performance was with the Granular Restore Technology (GRT) turned on.  We have a modest Exchange database at about 27gb with about 40 mailboxes.  Not really knowing what to expect I was happy to see that the whole job ran in 24minutes to our LTO4 drive.  Not too shabby, and now I can select individual mailboxes, or even specific folders/messages to restore if I needed to!  Obviously this time to backup will increase, but I think I can handle it for the foreseeable future.

Popularity: 39%

You might also like:

11Apr/110

ESXi PCI Passthrough Configuration

I've been working to setup my new LTO4 Changer and was having some trouble configuring it to work via SAS and VMWare.  I found this very handy article about how to configure PCI passthrough to your Guest OS which solved my problems.

 

http://www.petri.co.il/vmware-esxi4-vmdirectpath.htm

 

 

Popularity: 44%

You might also like:

22Nov/100

DR Test Results

Recently we performed our annual Disaster Recovery test.  We have learned something very valuable every year and tried to adjust our recovery plans accordingly, with this year being no different.  Even with all the new technology, DR still seems to be a tricky undertaking.

The first year we tested our plan we found that we really, really, REALLY, don't want to restore Active Directory onto unlike hardware.  The following year we had gotten a node onto our MPLS cloud which allowed us to have a replicated AD server at the DR site.  This greatly reduced the problem of restoring AD.  The year after that we tested our phone system portion of the DR plan and discovered that working with the telco in a DR situation will be challenging at the very least.  In the two years since that second test there have been some major changes that removed our ability to have replicated AD, so we were back to square one on that front.

This year we thought we would do a restore of our two year old VMWare environment.  We had decided to keep the scope to restoring only "Tier 0" service.  This included VMWare ESX , Symantec BackupExec, vSphere, and AD.  Time permitting we planned to restore as many servers as possible beyond the Tier 0 that were the bare minimum.

In the last year we had made the choice to purchase Symantec's BackupExec Agent for VMware Virtual Infrastructure (AVVI).  This is a BackupExec agent that allows you to backup VMWare Guest OS files directly through the ESX server and/or SAN.  The idea is that we would have our virtualized servers backed up to tape at the VMWare file level and that this would allow us to restore directly back to ESX.

Popularity: 60%

You might also like: